View: Grid | List
Sort by:
Spa Preparation & Water Maintenance

Spa Preparation & Water Maintenance

…otherwise soak in Power Soak or EcoSoak filter cleaning compound (overnight or per instructions on package) then set aside to dry.Add 8oz. Spa System Flush to the water and turn the jet pump on for about 15 minutes, or let sit overnight.Drain your tub.Reinstall filter cartridge. Keeping an extra…
Troubleshooting Water Problems

Troubleshooting Water Problems

…levelExcessive contaminatesMold or mildew on underside of spa cover (may not be visible in early stages)Solution:Test and adjust sanitizer levelShock-treat water with OxySpaChange water use Spa System Flush prior to drainingClean inside of spa cover apply 303 ProtectantUse an OzonatorExcessive pH…
Ozonator Installation

Ozonator Installation

…jet. Then cut this same line off short at the manifold and plug the tubing end at this manifold.Connect the ozone line to the jet, as illustrated above.If your spa has looped air lines to the jets, you will need to bypass one of the jets. Simply cut the jets air lines out of the loop, then reconnect…
Decontaminating Problem Spas

Decontaminating Problem Spas

…disinfect air lines. If your spa is equipped with an electric air blower, run it for a minute every five minutes.NOTE: Avoid inhalation of vapors or mist from spa during the decontamination procedures.Flushing Spa Plumbing SystemNext, and prior to draining, add Spa System Flush per label directions.…
Cold Weather Preparation & Winterizing Guide

Cold Weather Preparation & Winterizing Guide

…blow settingClean AllSoft, Absorbent TowelsNon-Toxic Spa Antifreeze � 1 quart for the spa + 1 quart for each pumpGel Gloss Polish303 Aerospace ProtectantHurricane Straps (optional)CoverAll or heavy-duty tarpAdd Spa System Flush to the spa before draining, thoroughly cleaning the plumbing to avoid…
Powered by Site Search powered by SLI Systems